Bull: rubber machine:

Product description
The machine adopts point of many colors (can) rubber
Responding to alternative artificially specific glue, realizing mechanization production
Adopts document can be directly convert point glue graphics make complex path, also become the save Labour graphics programming
Responding to launch a CCD visual positioning system can make some glue, higher precision
Applicable to various needs some rubber industry
Silicon rubber, common UV glue, EPOXY, red, silver glue, glue, COB black rubber B, heat conductive adhesive, aluminum paste, instant glue... Such points, all can use on equipment.
Common applications include:
So semiconductor packaging
So PCB electronic components and protection fixed
So the LCD glass board packaging stuck
So mobile telephone board glue or key points
So speaker glue dispensing so battery box sealing
So steam armed vehicle parts coating
So metal parts coating
Quantitative gas/liquid filling so coating
So the chip

Technical parameters
Glue range X/Y/Z (mm) 400/500/100
Maximum load Y AXIS/Z AXIS - - 10kg / 5kg
Movement speed X&Y/Z (mm/SEC) 0.1 ~ 8/350
Ability to 0.01 mm/Axis decomposition
Repeated accuracy + / - 0.01 mm/Axis
Intel JiJia mainboard chipset host CPU, memory, 512M cy young 3.0, 60G hard disk
LCD, man-machine interface 10.4 "
Japanese micro stepping motor system level precision motors
Operating mode inhibits PTP & CP
The synchronous belt transmission mode
Movement between functions for three axis linkage
Edit mode teaching, automatic transfer files DXF graphics files into glue path/CCD visual positioning system
I / 16Inputs signal Outputs / 16 0
External control interface RS232
Input voltage AC110V ~ 220V power full (internal switch 350W)
Work environment temperature/humidity 5-20-40 ° C / 90 no condensation
Envelop dimensions (WxDxH) / weight 1000 * 800 * 1400 mm / 150 kg
Longmen activity type dispensing machines (ground)

Product description
Adopts industrial computer control + professional dispensing control software
Responding to teach, DXF graphics files with automatic turn archives into glue path
When responding to run without movement, the worktable is taken in, effective work to improve work efficiency
Responding to reserve A and B have two points, can control alone
Responding to higher precision, also can carry CCD visual position system (note: for optional accessories)

Technical parameters
Glue 700 aoe / 500/100
Robots can carry maximum load 10kg
Movement speed by 0.1 ~ 500/350
Ability to 0.01 mm/Axis decomposition
Repeated accuracy + / - 0.005 mm / 0.005 mm/Axis ± Axis"
Intel chipsets, host CPU, memory 512M cy young 3.0, 60G hard disk
Touch screen man-machine interface 10.4 ". "the 10.4
Motor system AnChuan Japan servo motor
Operating mode inhibits PTP & CP
Driving mode high precision ball screw
Sports mode triaxial linkage
Edit mode teaching, automatic transfer files DXF graphics files into glue path
I / 16Inputs signal Outputs / 16 0
Input source 220V, 1200W
Work environment temperature/humidity 5-20-40 ° C / 90 no condensation
Envelop dimensions/weight about 1,300 * 1200 about 180 kg/x 1260